|
Thermoplastic
Adhesives for High Volume, High Precision Operations
Aquabond's water soluble thermoplastic is designed
for temporary mounting of hard materials for slicing, dicing, grinding, lapping and polishing.
and comes in 3 different bonding temperatures that can be purchased in either stick or bulk form. The nomenclature depicts each product's melting temperature centigrade. For specific technical information, see Product Data.
You can also view the MSDS sheets.
All products are virtually insoluble in cold or cool water, thus providing a strong bond in the presence of aqueous cutting lubricants and coolants.
All Aquabond thermoplastic adhesives when submerged in HOT water will go to solution and not return. The use of Aquaclean 900™ and ultrasonic or air agitation greatly speeds debonding and aids in producing very clean finished parts. As long as your work piece is non-hazardous, and you already have the proper approvals, the solution can be poured down the drain.
All Aquabond thermoplastic temporary adhesives come in either 100 gram bulk ingots or in 45 gram 5/8 inch diameter sticks for easy application.
 Aquabond 55™ has the lowest melting and bonding temperature and is generally used for lapping, backgrinding, wafer bonding and wafer thinning. It puddles quickly and can spread as thin as four (4) microns.
Price: $47.04 per pound in puck form.
 Aquabond 85™ has the highest melting and bonding temperature and is used as a backfill for bonding parts that are not flat. It is also used for grooving, cutting, slicing and dicing hard, single crystal materials. This product has higher tensile strength than other thermoplastics without being brittle.
|
Chemical Specific Solubility
Safe, Easy Removal of Finished Parts
Environmentally Friendly and Worker Safe 